Non-Clogging Process Pump
By Flow-Tech Industries

KWP

Maxum OH1

Non-Clogging Process Pump

Our solids-handling pump for handling water, oils and chemicals in process and general industry applications.

KWP

The KWP is designed for fluids with entrained solids and fibrous materials up to 1.5″ in diameter. Wide passages in the two-vane enclosed impeller minimize clogging and crushing of the entrained material. Primarily a horizontal unit, the KWP can be either frame-mounted or close-coupled.

Common options include soft packing, single or double cartridge seals, and any type of seal flush plan.

The back pull-out design makes maintenance easy and lower total life cycle cost. Shaft deflections are limited to 0.002″ at the seal.

All together, these features combine to make the KWP a pump of exceptional value, combining affordability with some of the most efficient hydraulics found in a pump of this type.

 

HYDRAULICS

FLOWS TO

1,300 GPM

300 m3/hr
HEADS TO

240 FT.

100 m
SOLIDS TO

1-1/2 IN. DIAMETER

38 mm diameter
POWER TO

50 HP

40 KW
SPEEDS TO

3,550 RPM

TEMPERATURES TO

250° F

120° C

Applications

  • Commercial
  • Desalination/Municipal
  • Industrial
  • Power Generation

HYDRAULIC COVERAGE

Hydraulic Coverage

SPECIFICATIONS

MATERIALS OF CONSTRUCTION

Casing Cast Iron or 316 SS
Bearing Frame Cast Iron
Impeller Cast Iron or 316 SS
Mechanical Seal Carbon on Ceramic or Silicon Carbide Faces
Shaft Sleeve 316 SS
Wear Rings 17-4PH SS
Other materials of construction available upon request.

DESIGN DATA

Input Power Up to 50 HP
Configuration Frame Mounted or Close Coupled with JM Shaft Extension
Connections Class 150 ANSI Flanges

 

FEATURES

1. Wear Rings: Replaceable wear ring.

2. Impellers: Wide passages to minimize clogging and crushing of the entrained material.

3. 360°Registered Fits: Fully confined gaskets assure proper sealing and alignment of critical fits.

4. Mechanical Seal: Single mechanical seal on close coupled units.

5. Back Pull Out Design: Allows inspection of rotating elements without disturbing the piping.

DOWNLOADS

 

For more information about Non-Clogging Process Pumps, call our main number at 713.690.7474. You can also contact a Flow-Tech sales representative via email at [email protected].


Houston
Corporate Headquarters
8700 Jameel St. Suite 190
Houston Tx. 77040

Phone: 713.690.7474
Fax: 713.690.7979
Other Locations
Beaumont, TX
Lake Charles, LA

E-mail: [email protected]
Site Map

Follow Us on Facebook Follow Us on Twitter View Us on Youtube