Flow-Tech Industries provides a diverse selection of turbine flow meters for liquid, gases, chemical and corrosive applications, low flows, inline, wafer style, and insertion type meters.

Our turbine line of flow meters feature:

  • ¼ inch through 12 inch in-line meters, 72+ with insertion type 
  • Flows from 0.004 GPM   
  • Pressure greater than 20,000 PSI*
  • Materials: Polymer, Bronze, Cast Iron and Stainless Steel
  • Direct read, remote display, digital and/or analog outputs, quadrature outputs for forward and reverse flow

Turbine Flow Meter Brands Available:


Turbines, Inc. Flow Meters

Turbines Inc. Turbine Flow Meters Turbines Inc. Turbine Flow Meters



  • 3/8" Thru 10 " size; threaded, flanged, Victaulic, wafer style
  • SS body and internals
  • Pressures to 5000 PSI
  • Accuracy +/- 1%
  • Compare to Halliburton, NuFlo, Cameron. Interchangeable internals.




High Pressure Turbine Meters

  • 2" and 3" size; 1502 Weco Union end connections
  • SS body and internals
  • Pressures to 15,000 PSI
  • Accuracy +/- 1%

Sponsler Precision Turbine Flow Meters

Sponsler Precision Turbine Flow Meters


The Sponsler brand Turbine Flow Meter measures volume by means of a precision-crafted, hydraulically balanced rotor mounted in the liquid flow stream. The meter's AC sine wave signal output is detected by a transducer and displayed by various electronic devices used for flow rate indication and totalization. Sponsler Precision Turbine Flow meters are engineered and manufactured to provide accurate flow measurement over a broad range of products, pressures and flow rates. The compact, rugged design has established a new standard for flow measurement by exceeding the expectations of the industry for higher accuracy and reliability under varied operating conditions.

NIST and Measurement Canada approved models are available for Custody Transfer applications measuring low to moderate viscosity products including solvents, fuel oil, diesel and gasoline.

Faure Herman Flow Meters

Turbines Inc. Turbine Flow Meters


The Dedicated Turbine Flowmeter for Custody Transfer Measurement

Main Applications

  • Oil Production Allocation
  • FSO, FPSO Metering
  • Tanker Loading / Offloading
  • Storage Management
  • Pipeline measurement


  • Accuracy +/- 0.15%
  • Repeatability +/- 0.02%
  • Max. Flow Rate 0.3 to 6000 m3/h
  • Viscosity Range 0.1 to 350 cSt (higher upon request)

ZENNER Flow Meters

ZENNER Turbine Flow Meters Houston, TX>

  <p style= 

  • 2" Thru 12" size
  • Cast Iron and Bronze Body, flanged connections.
  • Sealed mechanical register.
  • Complies with AWWA C701 Class II performance standards.

AW Company Flow Meters

AW Turbine Flow Meters


AW Company turbine flow meters are Ideal for accurate, reliable and economical flow measurement of a wide variety of fluids, including water, light oils, solvents, chemicals and fuels.

  • Flow ranges from 5 to 400 GPM
  • Accuracy ±1% of actual flow
  • Pressure rating up to 5,000 PSI
  • 316 stainless steel body

They also work as a drop-in replacement for Haliburton/NuFlow, Blancett and KimRay turbine flow meters.

Blancett Model Flow Meters

Blancett Turbine Flow Meters


Blancett manufactures a variety of rugged turbine style flow meters and flow measurement accessories including flow monitors, frequency-to-current/frequency-to-voltage output converters and k-factor scalers.

  • Fluid flows up to 5,000 GPM (171,000 BPD)
  • Pressures up to 5,000 psi (345 bar)
  • Temperatures to 350 °F (177 °C)

Hedland Flo-tech Flow Meters

Hedland-Flo-Tech Turbine Flow Meters


The Model 1100 Turbine Flow Meter is designed to withstand the demands of the most rigorous flow measurement applications. The meter features a rugged 316 stainless steel housing and rotor support assembly, CD4MCU stainless steel rotor, and abrasion-resistant tungsten carbide rotor shaft and journal bearings. The Model 1100 maintains measurement accuracy and mechanical integrity in the corrosive and abrasive fluids commonly found in a variety of industrial applications.


For more information about turbine flow meters, call our main number at 281.479.9700. You can also contact a Flow-Tech sales representative via email at [email protected].

Corporate Headquarters
1515 W. 13th Street
Deer Park, TX 77536


E-mail:[email protected]
Site Map

Follow Us on Facebook Follow Us on Twitter View Us on Youtube