Skip to content

Non-Clogging Process Pump

By Flow-Tech Industries

Non-Clogging Process Pump

Our solids-handling pump for handling water, oils and chemicals in process and general industry applications.


The KWP is designed for fluids with entrained solids and fibrous materials up to 1.5″ in diameter. Wide passages in the two-vane enclosed impeller minimize clogging and crushing of the entrained material. Primarily a horizontal unit, the KWP can be either frame-mounted or close-coupled.

Common options include soft packing, single or double cartridge seals, and any type of seal flush plan.

The back pull-out design makes maintenance easy and lower total life cycle cost. Shaft deflections are limited to 0.002″ at the seal.

All together, these features combine to make the KWP a pump of exceptional value, combining affordability with some of the most efficient hydraulics found in a pump of this type.

Fluid-Handling Equipment Controlled Solutions